Here is a collection of eBooks I am offering. They are related to the automotive field, mainly HHO production, electrical devices, and other suppressed knowledge. I have been a mechanic for 18 years, and I've built and tested all of the devices described in the eBooks. The reason I say this is because there are people out there who are trying to sell fake eBooks. Fortunately my eBooks contain real information. I am not out to rip anyone off, my ultimate goal is to spread knowledge and help people.
I have spent years working out the details, and testing the various designs, and the goal here is to try to save you money by saving you time, and offering complete instructions. Just in case, I do offer a 100% money back guaruntee. If you are not happy with an eBook that you purchase, I will gladly refund your money. With that said, I sincerely hope you will take a look at my eBooks. I've put a lot of time, money and effort into gathering the information, so I think you'll find each one of them very helpful.
I have received very kind and helpful feedback from people all over the world. Your kind feedback is very much appreciated. The reason I do this work is because of people like you.
If you want to match the resonant frequency of water, you can do it with a very simple circuit. There is no need for Meyer's complicated computerized resonance measuring "phase lock loop" circuit. The circuit I have been using will automatically match the resonant frequency of the water, and it always maintains resonance, no matter what impurities you put in the water. Even if you add an electrolyte, the circuit will tune its self accordingly to the exact resonant frequency.
If you want to experiment with the true resonant frequency of water in a water capacitor, you can attempt to copy Meyers unnecessarily complicated electronics, or you can use the circuit shown in the youtube video link below. After trying 20 different types of circuits, including the Lawson circuit, I was disgusted with the lack of power the circuits put out. After 25 prototypes, I finally figured out how to make an automatic, self adjusting circuit! It is in the eBook called "How to build a radiant charger." This charger can be used for hydrogen production, charging a Joe Cell with pure voltage potential, or charging lead acid batteries way better than with any conventional method. Since the radiant charger I've built is solid state, there are no moving parts.
All eBooks are 100% guaranteed, with a money back refund policy if you are not satisfied. Thanks!
I've developed a completely new radiant charger specifically suited for high power HHO production in water fuel cells, and charging automotive sized batteries. The plans are now available. If you purchase the Radiant Charger eBook above, you will receive the plans. They are included in the download. The new charger has the following benefits
1.) Uses off the shelf parts
2.) Can be scaled up easily
3.) Does not require hand wound custom coils
4.) Uses standard 12 volt transformer for the radiant coil
5.) Power circuit uses Bosch automotive spark box ($7.00 used from a car junkyard)
6.) Cannot fail when running disconnected
7.) Can be used to drive a Bedini-Cole window motor or Adams motor
8.) Runs in solid state mode no moving parts
9.) High power output
10.) Requires no 555 timer or complex circuits
This new radiant charger addresses all the issues that have been raised with other radiant chargers. The new radiant charger uses a Bosch spark module to drive the power coil, which provides extreme durability, as well as making it incredibly cheap and easy to scale up. 3 or more units can be attached together, in a daisy chain setup, to power large batteries or large HHO cells. Power output is between 400 to 40,000 volts depending on the type of coil you are using. To get the circuit, simply purchase the eBook How to Build a Radiant Charger shown above.
Thanks for looking!